True Tape 에뮬레이션 회로를 통해 라운딩과 압축을 제공하는 PORTICO 500시리즈의 테이프 에뮬레이터입니다.

■가변 실크/텍스처 전자 회로망은 아웃풋 변압기에서 고조파 비율과 조성을 미세 조정

■고조파를 강조하는 Soft Clip 회로

■완벽한 양의 포화도를 혼합하기 위한 Wet/Dry 컨트롤 통합

Line Amp Specifications (Measurements with tape

circuit disengaged)

Noise: Measured at Main Output, un-weighted, 20Hz-22kHz, Input

Terminated 40 Ohms.

Unity Gain Better than -100dBu

Frequency Response

Measured at +10dBu, trim at unity.

Main Output +/- 0.25dB from 5Hz to 60KHz -2dB @ 120KHz

Maximum Output Level 23.25dBu

Total Harmonic Distortion and Noise

@ 1kHz, +20dBu output level Better than 0.0025% @ 20Hz, +20dBu

output level 0.07% Typical (2nd and 3rd harmonic)

Tape FX Specifications

insert spec description

Noise

Measured at Main Output, un-weighted, 20Hz-22kHz, Input

Terminated 40 Ohms.

Saturation @ minimum Better than -100dBu Saturation @ maximum

Better than -100dBu

Frequency Response

15 IPS, Input @ -0 dBu -3dBu @ 28kHz Saturation @ minimum 0dBu

@ 10Hz +5dBu Peak @ 60Hz

Saturation @ maximum -3dBu @ 20kHz -3dBu @ 12.5Hz +2.4dBu Peak

@ 60Hz

30 IPS, Input @ -0 dBu -3dBu @ 120kHz Saturation @ minimum -3dBu

@ 10Hz +3.15dBu Peak @ 125Hz

Saturation @ maximum -3dBu @ 100kHz -3dBu @ 12.5Hz

+1.3dBu Peak @ 110Hz

Total Harmonic Distortion and Noise

Refer to sweeps on page10 15 IPS, Input @ -0 dBu 0.4% @ 3kHz to 1%

@ 175Hz typical

Saturation @ minimum Greater than 1% below 175Hz typical

Saturation @ maximum 1% at 6kHz typical 0.3% @ 1kHz to 3%

@ 50Hz typical

30 IPS, Input @ -0 dBu 1% at 1kHz typical

Saturation @ minimum 0.6% @ 400Hz 5% @ 20Hz typical

Saturation @ maximum 1.5% @ 20kHz to 0.4% @ 1kHz typical 0.4%

@ 1kHz to 2 %@ 50Hz typical

Power requirements

Supplied by 500 series rack with 110-125 mA @ +/- 16V DC